Frosted Window Decals

One may also choose between having a border between the outline of their quoted design by selecting ‘custom with border ‘ shape option in the check out. Whatever one chooses, our frosted window decals look attractive, clean, and professional.
Each of the design options will display the desired graphic or message in a unique way. Our frosted window decals provide an elegant, professional appearance at a low cost, and last for a minimum of five years with proper installation and care.
Our frosted window decals can be used both indoors and outdoors, and are most commonly used to display logos, advertise products and promotions, offer general business information, and provide privacy for company boardrooms, offices, and retail storefronts.

Why Choose Us

– Next day production – If the order for your removable wall decal is placed by 9 PM, we guarantee to have it produced and shipped the very next day;
– Twenty five years of experience – Two and a half decades of experience, expertise, and production;
– A hundred percent satisfaction – We can guarantee that you will be satisfied with your removable wall decal. If you aren’t, we will make sure to make it right;
– Free design services – Make your design perfect for your needs.

Frosted Window Decal Features

– Our frosted window decals provide privacy;
– Our frosted window decals are fully customizable;
– Our frosted window decals are among the cheaper alternatives on the market;

– Our frosted window decals are of highest quality;

– Our frosted window decals are safe for indoor and outdoor use.

Types of Frosted Decals and Lettering Available in our Catalogue

Frosted Vinyl Lettering / Reverse Cut

How it’s made – Our frosted vinyl lettering is manufactured by cutting it directly out of a background of a two millimeter sheet of frosted vinyl material. For this purpose, we require that vector artworks is submitted as quoted design (.ai, .eps, .svg, .pdf). One may take advantage of our free online design services if they find themselves in need of any assistance.

Shape – The shape of our reverse cut frosted vinyl lettering is a standard rectangle or square, while the actual design is cut out from the middle of a larger material sheet.

Print surface option – Adhesive on back / adhesive on front.

Frosted Vinyl Lettering / Reverse Cut – Installation

We manufacture our reverse cut frosted vinyl lettering as pre-spaced and pre-masked with transfer tape. This ensures an all at once simple installation process which allows all components of the product to be installed at the same time.
Our reverse cut frosted vinyl lettering is a wet install which means that it requires a water and soap based mixture in order to adhere to the designated surface. We have provided the detailed installation guide below, as well as an instructional video one can find on our website.
It is important to note that, for larger designs which are intended to cover entire windows or other large surfaces, it is our recommendation that professional help is employed for best results.

– Before the application of reverse cut frosted vinyl lettering begins, the following supplies are to be gathered to facilitate the process:
– Spray bottle;
– Paper towels;
– Application squeegee (available as an additional purchase with every order at a small additional cost);
– Window squeegee;
– Razor knife;
– Ruler.

– The designated surface for your reverse cut frosted vinyl lettering is to be thoroughly cleaned prior to the installation. It should be allowed to either air dry, or wiped dry with a squeegee.
– The application solution for the reverse cut frosted vinyl lettering is to be created by combining three drops of dish soap with one gallon of water and placed into a spray bottle.
– The designated installation location for your reverse cut frosted vinyl lettering is to be measured.
– The reverse cut frosted vinyl lettering is to be held up to the window in the designated location and a horizontal strip of masking or painters tape is to be applied to the top of the reverse cut frosted vinyl lettering in order to create a hinge.
– The bottom edge of the reverse cut frosted vinyl lettering is to be held away from the window, and the designated surface is to be sprayed with the application solution that has been created in the step above.
– The back liner is to be removed from the reverse cut frosted vinyl lettering, starting from the top corner and going down to the adjacent bottom corner. As the back liner is being removed, the application solution is to be generously sprayed onto the adhesive side of reverse cut frosted vinyl lettering.
– Once the back liner has been completely removed, and both the reverse cut frosted vinyl lettering and the designated surface are wet with application solution, a squeegee is to be used to apply pressure to the front of the decal, adhering it to the window. The squeegee is to be used from left to right and from top to bottom.
– If bubbles or creases begin to develop during this process, the affected portion of the reverse cut frosted vinyl lettering is to be lifted carefully away from the surface and the application process is to be repeated.
– Once the entire reverse cut frosted vinyl lettering has been applied to the window without major bubbles or creases, the squeegee is to be ran over entire graphic one more time in order to ensure that the adhesive has firmly attached to the surface.
– Then, the pre-masked transfer tape is to be removed, starting from the top corner and going down to the adjacent bottom corner. If any of the reverse cut frosted vinyl lettering begins to peel off the surface during this process, the squeegee is to be used to firmly adhere it back to it, until the pre-masked tape comes fully cleanly off.
– Once the pre-masked transfer tape has been fully removed, the back liner is to be laid over the installed reverse cut frosted vinyl lettering and hard pressure is to be applied with a sqeeegee. This will remove any air bubbles or creases that may have formed during the application.
– Paper towels are to be used  to clean the surface the reverse cut frosted vinyl lettering has been installed on, and to remove any excess water from the edges of the graphic. It may take several days for the adhesive to completely dry and bind to the surface.
– If the reverse cut frosted vinyl lettering goes up to the edge of the designated surface, a razor blade or a ruler can be used to trim the excess material away until the reverse cut frosted vinyl lettering is flush with the edge of the window.

Frosted Window Vinyl Lettering

How it’s made – Our frosted window vinyl lettering is manufactured by cutting it directly out of a background of a two millimeter sheet of frosted vinyl material. For this purpose, we require that vector artworks is submitted as quoted design (.ai, .eps, .svg, .pdf). One may take advantage of our free online design services if they find themselves in need of any assistance.

Shape – Our frosted window vinyl lettering are cut to the exact quoted design shape with inner spaces of lettering and graphics weeded / picked out.

Print surface option – Adhesive on back / adhesive on front.

Frosted Window Vinyl Lettering – Installation

We manufacture our frosted window vinyl lettering as pre-spaced and pre-masked with transfer tape. This ensures an all at once simple installation process which allows all components of the product to be installed at the same time.
Our frosted window vinyl lettering is a wet install which means that it requires a water and soap based mixture in order to adhere to the designated surface. We have provided the detailed installation guide below, as well as an instructional video one can find on our website.
It is important to note that, for larger designs which are intended to cover entire windows or other large surfaces, it is our recommendation that professional help is employed for best results.

– Before the application of frosted window vinyl lettering begins, the following supplies are to be gathered to facilitate the process:
– Spray bottle;
– Paper towels;
– Application squeegee (available as an additional purchase with every order at a small additional cost);
– Window squeegee;
– Razor knife;
– Ruler.

– The designated surface for your frosted window vinyl lettering is to be thoroughly cleaned prior to the installation. It should be allowed to either air dry, or wiped dry with a squeegee.
– The application solution for the frosted window vinyl lettering is to be created by combining three drops of dish soap with one gallon of water and placed into a spray bottle.
– The designated installation location for your frosted window vinyl lettering is to be measured.
– The frosted window vinyl lettering is to be held up to the window in the designated location and a horizontal strip of masking or painters tape is to be applied to the top of the frosted window vinyl lettering in order to create a hinge.
– The bottom edge of the frosted window vinyl lettering is to be held away from the window, and the designated surface is to be sprayed with the application solution that has been created in the step above.
– The back liner is to be removed from the frosted window vinyl lettering, starting from the top corner and going down to the adjacent bottom corner. As the back liner is being removed, the application solution is to be generously sprayed onto the adhesive side of frosted window vinyl lettering.
– Once the back liner has been completely removed, and both the frosted window vinyl lettering and the designated surface are wet with application solution, a squeegee is to be used to apply pressure to the front of the decal, adhering it to the window. The squeegee is to be used from left to right and from top to bottom.
– If bubbles or creases begin to develop during this process, the affected portion of the frosted window vinyl lettering is to be lifted carefully away from the surface and the application process is to be repeated.
– Once the entire frosted window vinyl lettering has been applied to the window without major bubbles or creases, the squeegee is to be ran over entire graphic one more time in order to ensure that the adhesive has firmly attached to the surface.
– Then, the pre-masked transfer tape is to be removed, starting from the top corner and going down to the adjacent bottom corner. If any of the frosted window vinyl lettering begins to peel off the surface during this process, the squeegee is to be used to firmly adhere it back to it, until the pre-masked tape comes fully cleanly off.
– Once the pre-masked transfer tape has been fully removed, the back liner is to be laid over the installed frosted window vinyl lettering and hard pressure is to be applied with a squeegee. This will remove any air bubbles or creases that may have formed during the application.
– Paper towels are to be used to clean the surface the frosted window vinyl lettering has been installed on, and to remove any excess water from the edges of the graphic. It may take several days for the adhesive to completely dry and bind to the surface.
– If the frosted window vinyl lettering goes up to the edge of the designated surface, a razor blade or a ruler can be used to trim the excess material away until the frosted window vinyl lettering is flush with the edge of the window.

Frosted Window Decals

How it’s made – We print our frosted window decal designs onto sheets of two millimeter frosted vinyl material. For this purpose, we require that vector artworks is submitted as quoted design (.ai, .eps, .svg, .pdf). One may take advantage of our free online design services if they find themselves in need of any assistance.

Shape – Our frosted window decals are cut to the exact quoted design shape with inner spaces of lettering and graphics weeded / picked out.

Print surface option – Adhesive on back / adhesive on front.

Frosted Window Decals – Installation

We manufacture our frosted window decals as pre-spaced and pre-masked with transfer tape. This ensures an all at once simple installation process which allows all components of the product to be installed at the same time.
Our frosted window decals is a wet install which means that it requires a water and soap based mixture in order to adhere to the designated surface. We have provided the detailed installation guide below, as well as an instructional video one can find on our website.
It is important to note that, for larger designs which are intended to cover entire windows or other large surfaces, it is our recommendation that professional help is employed for best results.

– Before the application of frosted window decals begins, the following supplies are to be gathered to facilitate the process:
– Spray bottle;
– Paper towels;
– Application squeegee (available as an additional purchase with every order at a small additional cost);
– Window squeegee;
– Razor knife;
– Ruler.

– The designated surface for your frosted window decals is to be thoroughly cleaned prior to the installation. It should be allowed to either air dry, or wiped dry with a squeegee.
– The application solution for the frosted window decals is to be created by combining three drops of dish soap with one gallon of water and placed into a spray bottle.
– The designated installation location for your frosted window vinyl lettering is to be measured.
– The frosted window decals is to be held up to the window in the designated location and a horizontal strip of masking or painters tape is to be applied to the top of the frosted window decals in order to create a hinge.
– The bottom edge of the frosted window decals is to be held away from the window, and the designated surface is to be sprayed with the application solution that has been created in the step above.
– The back liner is to be removed from the frosted window decals, starting from the top corner and going down to the adjacent bottom corner. As the back liner is being removed, the application solution is to be generously sprayed onto the adhesive side of frosted window decals.
– Once the back liner has been completely removed, and both the frosted window decals and the designated surface are wet with application solution, a squeegee is to be used to apply pressure to the front of the decal, adhering it to the window. The squeegee is to be used from left to right and from top to bottom.
– If bubbles or creases begin to develop during this process, the affected portion of the frosted window decals is to be lifted carefully away from the surface and the application process is to be repeated.
– Once the entire frosted window decals has been applied to the window without major bubbles or creases, the squeegee is to be ran over entire graphic one more time in order to ensure that the adhesive has firmly attached to the surface.
– Then, the pre-masked transfer tape is to be removed, starting from the top corner and going down to the adjacent bottom corner. If any of the frosted window decals begins to peel off the surface during this process, the squeegee is to be used to firmly adhere it back to it, until the pre-masked tape comes fully cleanly off.
– Once the pre-masked transfer tape has been fully removed, the back liner is to be laid over the installed frosted window decals and hard pressure is to be applied with a squeegee. This will remove any air bubbles or creases that may have formed during the application.
– Paper towels are to be used to clean the surface the frosted window decals has been installed on, and to remove any excess water from the edges of the graphic. It may take several days for the adhesive to completely dry and bind to the surface.
– If the frosted window decals goes up to the edge of the designated surface, a razor blade or a ruler can be used to trim the excess material away until the frosted window decals is flush with the edge of the window.

Additional Specifications

– Inside or outside – Our frosted window decals can be installed both indoors or outdoors. They also come with the ‘inside glass’ option which allows them to be placed on the inside of a glass surface and be visible ‘the right side up’ from the outside.
– Easy to install – Our frosted window decals can be installed within minutes without requiring professional help for the process. We have provided installation guide below, as well as including one with each order we ship out, making sure our customers know exactly how to proceed.
– Installation manual included –  We include an installation manual with every order we send to our customers, ensuring that they can install our products easily and effectively.
– Resistant to water and weather – Our frosted window decals are manufactured with durable vinyl material and can withstand rain, sunlight, and other elements for approximately three years.
– Custom cut – Our frosted window decals can be cut in a diverse range of shapes including square, rectangle, rounded corners (a quarter of an inch radius, and an inch radius), circle, oval, custom, and custom with border. This allows our customers to fully customize the shape of their opaque window decal.
– Printed to last – We manufacture our frosted window decals with three millimeter vinyl material, and an ultraviolet ink that is resistant to water, weather, and fade, ensuring that our opaque window decals can withstand the harshest of conditions for a minimum of five years.

Frosted Lettering

Weight – Zero-point-zero-seven pounds per square foot, about the weight of seven quarters.
Thickness – zero-point-zero-zero-two inches, two millimeters or fifty microns, about the thickness of half a sheet of a copy paper.
Details – Our frosted window lettering products are semi-transparent, provide privacy, permanent, easy to install, and come with a pre-masked transfer tape.
Uses – Indoors and outdoors, business and private.
Print method – Cut, not printed, directly out of frosted vinyl material.
Common sizes – Twelve by twelve inches, twenty four by twelve inches, two feet by two feet, four feet by four feet, three feet by five feet.
Estimated lifespan – At least eight years, with possible variations depending on climate and usage.

Frosted Window Decals

Weight – Zero-point-zero-seven pounds per square foot, about the weight of seven quarters.
Thickness – zero-point-zero-zero-two inches, two millimeters or fifty microns, about the thickness of half a sheet of a copy paper.
Details – Our frosted window lettering products are semi-transparent, provide privacy, permanent, easy to install, and come with a pre-masked transfer tape.
Uses – Indoors and outdoors, business and private.
Print method – For producing our frosted window decals we utilize a four-color, eco-friendly printing process as well as ultraviolet ink that is resistant to weather, fade, and abrasion. No white ink will be used in the printing process.
Common sizes – Twelve by twelve inches, twenty four by twelve inches, two feet by two feet, four feet by four feet, three feet by five feet.
Estimated lifespan – At minimum of five years with proper installation and care.

Frosted Window Decal Care

Our frosted window decals are not to be allowed to become exposed to, or submerged in, water or excessive moisture for an extended period of time before the installation. Our frosted window decals are not to be power washed once they have been installed.
Instead, they are to be lightly wiped with a damp cloth. Our frosted window decals can be removed by simply peeling them away from the surface they had been installed on using a window cleaner and a razor blade to remove the leftover residue.